Flood control board common problems and treatment methods

　　Flood control board common problems and treatment methodsFlood control panel device can be said to be very widely used at present. In the development of recent years, the water baffle is constantly innovative, and there are more and more types of water baffle can adapt to a variety of environments. The main function is to prevent water from entering underground basements, warehouses, shops, riverbanks, underground shopping malls and other places that need waterproof entrances and exits all need to be protected to avoid property damage.

　Jiangsu Yongjing water ConservancyAfter years of improvement and perfection, the product has become a mature flood control product. The product prevents rainwater from entering.

　　1, irregular installation of water baffle will lead to water leakage. When installing a water baffle, the side column is not sealed on the wall or the ground is not flat due to water leakage, and the wall layer is not glued and sealed, resulting in water leakage.

　　Solution: Refurbish floors and walls Flat floors and walls. If the ground is uneven, you are advised to install a ground card slot. The walls need to be sealed with glass glue. High elastic sealant should be used for sealing. All gaps between sealing points should be weather-proof to ensure watertightness and prevent power generation leakage.

　　2, water leakage caused by quality problems in the production of water baffles. Some baffle plates are produced without seals, reducing the material used, and the leftovers are used directly for key components to reduce costs. The service life of the water baffle is very short, resulting in unsatisfactory water blocking effect.

　　The solution: Re-purchase the flood baffle, choose the manufacturer of the baffle, and then choose a reliable manufacturer.

　　3, the side column is not sealed on the wall, resulting in water leakage. Leakage caused by loosening between the side post and the wall is a common cause. On the one hand, this is due to the poor quality of the water baffle. The quality of the water guide plate is poor, the strength is insufficient, and it is easy to deform. Soon after use, the mortar layer on the side of the baffle will break and fall, causing leakage.

　　Solution: Rework the seams.